Jun
01

Flow Diagram for a 6 Stage RO with UV and Booster Pump

By

Flow Diagram:

The following describes the flow diagram for a H2O Splash 6 stage Reverse Osmosis system with Ultraviolet light and a Booster Pump.

1) Using a saddle valve, you tap into the water source.

2) The source water flows through the 1/4″ tubing to the first pre-filter.

3) The water passes through the sediment filter, then to the first carbon block filter and on to the 2nd carbon block filter.

4) From the 3rd pre-filter, the water goes to the Booster Pump.

5) The Booster Pump increases the flow rate as the water passes through the ASO Valve.

6) Next, the Booster Pump pushes the water through the RO membrane where the product water (RO water) is forced through the membrane and the good RO water then goes to the ASO valve.

7) From the ASO valve, the water travels to the Pressure Switch, then to the “Tee” on the Post filter.

8) If the facet is not turned on, the good RO water goes through the “Tee” and then on to the storage tank.

9) When the faucet is activated, water is drawn from the storage tank and flows back to the “Tee” and through the Post filter.

10) Finally, the RO water now goes through the UV light and on to the faucet and into your glass or container.

A flow diagram is presented on the web site. Go to the “Home Page” and click on Instruction Manuals. “Mouse” down to locate the “Diagram” for a 6 stage RO system with a UV light and Booster Pump. With the use of the description words in this Blog, you will be able to follow the flow of water through the diagram.

Comments are closed.