Question: How do I install my Booster Pump?

Answer:

Several of the Reverse Osmosis systems that we offer have the Booster Pump installed and the plumbing is complete, these RO systems do not require you to do additional plumbing or installation.

If you are adding a Booster Pump to your existing Reverse Osmosis system, below is an outline of the steps for you to follow;

1) Mount the Booster Pump on the wall near your Reverse Osmosis system.

2) Insert a “tee” in the 1/4″ tubing between the last pre-filter and the ASO Valve.

3) From that “tee” run a 1/4″ piece of tubing to the inlet on the Booster Pump.

4) Next, run a 1/4″ piece of tubing from the outlet on the Booster Pump to the  inlet on the ASO Valve.

5) Insert the Booster Pump Switch into the 1/4″ tubing after the ASO valve

CLICK HERE FOR MORE DETAIL INSTALLATION INSTRUCTIONS FOR THE BOOSTER PUMP.