Question: What type of Reverse Osmosis systems are available?
By
6 Stage Reverse Osmosis system
Answer: We offer a wide range of RO systems from two stage up to seven stage systems plus options within the given stages. To just sight an example, we offer over 30 different models of 5 stage RO systems. We build the Reverse Osmosis systems here in our facility in the USA, therefore we can offer over 100 different RO system models. The information listed below is not specific to any given model but provides a general description of a Reverse Osmosis system. As an example, if your RO system has 3 pre-filters, the comments about carbon filters will relate to both of your carbon pre-filters. The sediment pre-filter is the first vertically mounted filter in a standard 3, 4, 5, 6 and 7 stage RO system (remember, the incoming water enters from the right side of the RO system, so the first vertical housing is the housing on the right). The second vertical filter is a carbon pre-filter in a standard 3, 4 , 5, 6 and 7 stage RO system. The third pre-filter is a carbon in most 5, 6 and 7 stage RO systems. The RO membrane is the lower and larger horizontally mounted housing that has an end cap that unscrews. Mounted horizontally above the membrane housing is the in-line carbon (polish/post) filter on 4, 5, 6 and 7 stage RO systems. The photo above is of a 6 stage RO system which includes a UV light positioned horizontally above the membrane. The 7 stage system also has an in-line DI filter which is mounted horizontally next to the in-line carbon (post) filter. These comments relate to standard RO systems and some non-standard, proprietary systems may vary from this configuration.
