Question: How Do I Replace The Post Carbon Filter?

Answer:

Post Carbon Filter – Release the quick-connect fitting from both ends of the in-line post filter and remove the tubes. If your system has FPT fittings, you will need to unscrew and remove the quick-connect fittings from the in-line filter. Discard old filter. Again if your system has FPT fittings, you will need to wrap the threaded end of the quick-connect fitting with Teflon tape and re-install into each end of the new post filter. Tighten the threaded end of the fitting into the ends of the new filter. Note: If your post carbon filter has quick connect fittings build into the filter, you do not need to unscrew the fitting and then wrap it with Teflon, you simply remove the tubing from the old filter and the insert the tubing into the new post filter. Be certain the arrow on the new filter is pointing with the flow of the water toward the tubing leading to the faucet.